Dry Contact Smat Module Z-Wave Plusv2 - wiDom

WiDom Smart Dry Contact Switch can turn ON and OFF equipment’s with an independent power supply, such as solenoid valves (e.g. gas, water and irrigation), power operated valves etc.

​

WiDom Smart Dry Contact Switch is very easy to install and works with both momentary and toggle switches. The device is equipped with contact protection technology (Zero Crossing) which reduces the electrical stress on the relay contacts and ensures a longer life.

The open / closed switching of the device always occur when the instantaneous value of voltage is 0. It operates in any Z-Wave network with other Z-Wave/Z-Wave Plus certified devices and controllers from any other manufacturer. As a constantly powered node, WiDom Smart Dry Contact Switch will act as repeater regardless of the vendor in order to increase the reliability of the network. This device is a security enabled Z-Wave Plus product that is able to use encrypted Z-Wave Plus messages to communicate to other security enabled Z-Wave Plus products.

This device must be used in conjunction with a Security Enabled Z-Wave Controller in order to fully utilize all implemented functions

Tech Specs:

• Power supply 110 - 230 VAC±10% 50/60 Hz
• Maximum Load on Relay 13A resistive Load
• System temperature limitation 105°C
• Work temperature From -10° to 40° C
• Power consumption < 260 mW in standby < 480 mW with working load
• Protection system S0 and S2 Security
• Maximum distance Up to 100 m outdoor Up to 40 m indoor
• Dimensions 37x37x17 mm
• Actuator element 16 Amp relay
• Compliance CE, RoHs Electrical
• IP Rating IP20 
   

Spune-ţi opinia

Introduceţi codul din imagine: