€ 30,50
Descriere
The USB300 is a small USB bridge that connects a computer to the wireless network EnOcean: sensors, actuators, or other gateways interacting with the communication standard.
Equipped with a USB type A connector, it can be connected to a PC, a home automation box (eedomus, ...) and any other device with a USB Host port is compatible.
With a transceiver module of TCM310 type, USB300 is actually a bidirectional gateway (transmitter / receiver) between EnOcean environment and virtual USB serial port interface, managed by an external host port. It enables various features such as:
- Receptions frames transmitted from one (or more) sensor (s)
- Emissions messages to one (or more) actuator (s)
- Remote Management
- Programmable Repeater
- Other ... This gateway also allows to manage up to 90 EnOcean telegrams per second.
FUNCTIONS:
- EnOcean USB controller
- Receive messages from switches and sensors EnOcean self-powered
- Send messages and control actuators EnOcean
- Remote configuration of self-powered sensors
- Visualization of radio telegrams DolphinView base
- Virtual COM driver (FTDI) port for Microsoft Windows, Linux and Apple Mac
- Supports all formats of message profiles EnOcean 2.5
- EnOcean protocol Series 3
- Support the values of signal strength
- Programmable signal repeater
- Remote Management
- Compatible with home automation controller eedomus
SPECIFICATIONS:
- Power: USB type A
- USB / life Connector: USB 2.0-3.0 / 500 cycles
- Transmission frequency: 868.3MHz
- Indoor range:
- Masonry: 20m through walls up to 3
- Reinforced concrete 10m through one wall / ceiling
- Drywall / Wood: 30m through walls up to 5
- Transmit power: 10 mW max
- Operating temperature: 0 ° C to +40 ° C
- Operating Humidity: 0% to 80% RH (non-condensing)
- Weight: 12g
- Dimensions: 66mm x 23mm x 9mm
- Compliance: CE & RoHS