€ 74,34
Descriere
Carbon monoxide is an invisible, deadly danger in the house! It is toxic and can be very insidious. You can not see, you can not taste it and you can not feel.
The carbon monoxide sensor (CO) of POPP let you breathe. Whether you have a fireplace or open another location in the fire in your home, or you use a gas heater or if you just want to improve the air quality in your home to prevent headaches and discomfort, the CO sensor enhances safety and your living conditions at home.
The electrochemical CO sensor Popp is used for monitoring the air quality and warns if the CO content in a room exceeds a set limit. In case of alarm, the device beeps (85dB / 3m) and sends reports to the alarm and the current measured value to the Z-Wave control center.
The integrated battery ensures a long life (10 years) without battery change and thanks to the integrated module Z-Wave, you can include the CO sensor to your home network and corresponding automation. The device has a tamper protection, a button easy to reach for the test and inhibition and a LED indicator for power, the alarm and error reporting mode. The internal memory informs about alarms previous CO.
In addition to the alarm limits set at the factory, you can set your own limits to trigger a notification example on the smartphone to invite residents to open the windows to ventilate the room.
FEATURES:
-
carbon monoxide detector
-
battery lasts 10 years
-
alarm siren of 85dB at 3m
-
memory function to store the previous sweeps of CO
-
LED indicator
-
Large button for the test and inhibition
-
Easy to install
-
tamper protection
-
Z Technology -Wave More
SPECIFICATIONS:
-
Module Type: Z-Wave Transmitter
-
Power: Lithium
-
Battery life: 10 years
-
Frequency: 868.42 MHz
-
Transmission distance: 100m open field, 40m indoor
-
Standards
-
BSEN 50270: 1999
-
BS EN 60335-1: 1994
-
BS EN 50291: 2010
-
Specificaţii
Primary Controller Compatibility | |
---|---|
1 eeDomus+ | NOT COMPATIBLE |
Fibaro Home Center 2 v4.160 | NOT COMPATIBLE |
Fibaro Home Center Lite v v.4.160 | NOT COMPATIBLE |
Vera Edge / Plus / Secure | NOT COMPATIBLE |
Zipabox/Zipaminicro/ZipaTile | NOT COMPATIBLE |
Piper / Piper NV (v.1.7.1) | NOT COMPATIBLE |
Indigo | NOT COMPATIBLE |
Z-Wave.me / Z-Way / PoPP Hub v 3.2.1 | FULL COMPATIBLE |
Tech Data | |
50 IP Rating | IP20 |
51 Power Supply | Batery 3,6V ER14250 |
53 Explorer Frames - NWI Support | Yes |
54 SDK | 6.51.06 |
55 App Version | Firm version 1.0 |
58 Z-Wave Alliance Product Link | http://products.z-wavealliance.org/products/2086 |
Procedures | |
90 Incluison | Single click |
91 Exclusion | Single click |
92 Factory Reset | To do a factory reset press the button on the bottom of the device for at least 10 seconds. This procedure should only be used when the primary controller is inoperable. |
93 Wake Up | A single click on the button will wakeup the device. |