€ 53,71
Descriere
With this Z-Wave Plus dimmer micromodule, you can vary the intensity of a dimmer-compatible lamp, vary the speed of a motor (such as a fan for example) or control any type of device with a 0- 10V. This can be donefrom your home automation box, but also thanks to a local switch. In addition to its 0-10V output, this module has a multifunction input to connect a switch (toggle or pulse), a potentiometer or a 0-10V signal.
Thus any analog probe 0-10V can be connected to trigger the output according to a defined threshold. Qubino Dimmer 0-10V But this is not all, since this module also has an input to connect a temperature sensor, making it very efficient to manage a heating, ventilation or air conditioning system for example.
Finally, it should be noted that the QUBINO brand has set obligations of quality and durability: they have carefully selected high-performance components such as the OMRON relay. Numerous quality control tests have also been carried out on the module to ensure maximum durability (resistant enough to operate at temperatures ranging from -10 ° C to 40 ° C). Its installation is very simple, thanks to a reduced size, and the possibility to use any type of power supply (AC or DC).
FUNCTIONS:
- Remote control of 0-10V ballast lighting
- Check the speed of a fan, the flow of a valve (with 0-10V input)
- Function ON / OFF / VARIATION
- Incorporates the Z-Wave 500 series chip (Z-Wave +) 250% faster communication compared to standard Z-Wave devices
- The smallest variator module in the world
- Designed for ease of installation (easy to attach cables), tested by professional electricians
- Very low consumption with less than 0.7W
- Operating temperature -10 ° C to 40 ° C
- One connector for analog temperature sensor
- One multifunction input to connect a switch (toggle or pulse), potentiometer or 0-10V signal (any sensor with 0-10V analog output)
TECHNICAL CHARACTERISTICS :
- Power supply: 12-24VDC
- Power consumption: 0.7W Max.
- Control voltage: -20 / + 20VD
- C Control Signal Range: 0-11VDC
- Radio transmission frequency: 868.42MHz,
- Z-Wave radio range: up to 30 m indoors (depending on surrounding materials)
- Measurement range of the digital temperature sensor (sensor sold separately): -50 ~ 125 ° C
- Operating temperature: -10 ~ 40 ° C
- Space required for installation: Ø? 60mm
- Dimensions (W x H x D): 41.8 x 36.8 x 15.4mm
- Weight: 28g
- Certifications: CE, RoHs
Specificaţii
Primary Controller Compatibility | |
---|---|
1 eeDomus+ | Full Compatible |
Fibaro Home Center 2 v4.160 | Compatible |
Fibaro Home Center Lite v v.4.160 | Compatible |
Vera Edge / Plus / Secure | Not Tested |
Zipabox/Zipaminicro/ZipaTile | Not Tested |
Piper / Piper NV (v.1.7.1) | Not Tested |
Indigo | Not Tested |
jeedom | Full Compatible |
Z-Wave.me / Z-Way / PoPP Hub v 3.2.1 | Not Tested |
Domoticz | Not Tested |
OpenHAB | Not Tested |
Tech Data | |
51 Power Supply | 12 -24 V DC |
52 Attachable Loads | 0-10V Balast |
53 Explorer Frames - NWI Support | |
54 SDK | |
56 Device Type | |
58 Z-Wave Alliance Product Link | |
Procedures | |
90 Incluison | |
91 Exclusion | |
92 Factory Reset | |
93 Wake Up |