Current startup limitator - H-Tronic


În Stoc
Cod produs:

Not yet rated
Spune-ţi opinia


Optimal protection for critical loads. To limit starting currents on problematic devices, such as energy saving bulbs and fluorescent bulbs. Problematic devices, such as electronic ballasts, energy-saving light bulbs, incandescent bulbs, LED drivers, and switching power supplies, consume a lot of power during ignition due to the multiplication of current. nominal and can therefore destroy the switching relay.

With the ESB200 current limiter, the high current that can occur when switching on electronic devices is limited to a harmless value. It is also possible to limit the inrush current of incandescent lamps to give them a longer life. A protection fuse is also integrated. This starting current limiter can be plugged directly into the power supply circuit for loads up to 200 VA. This compact device can be installed very easily in junction and recessed boxes or in lamp boxes, for example. The device is easily installed in series with the load.

Note: The maximum power of 200 W must not be exceeded!


  • Starting current limiter
  • Installation in series with the load
  • Integrated fuse
  • Compact dimensions


  • Power supply: 230V / 50Hz
  • Peak inrush current: 90A / 1mS
  • Ambient temperature: 5 - 35 degrees
  • Load: max. 200VA
  • Connection: two flexible connection cables with approx. 100 mm long
  • Dimensions (L x W x H): 28 x 23 x 10 mm
  • Weight: 10g

Opinii (0)

Spune-ţi opinia

Notă: Codul HTML este citit ca şi text!

Rău            Bun


Z-Wave Romania

The On-line shop for home automation Z-Wave products. Based in Spain, we deliver all over the world. Z-Wave is the international standard for wireless networking of home control systems. You can manage lighting, electricity, blinds, alarms etc ... Z-Wave products from different vendors work well together allowing control of smart home.

Contact Us