€ 48,76
Descriere
The PST02-1C detector offers 3 different functions: opening detection , temperature sensor and light sensor . It consists of two parts: a sensor and a magnet . They are designed to be placed on a door or window with the magnet attached to the opening portion and the sensor on the fixed part .
The opening of the door or window magnet sensor depart , which will trigger the detector will send a signal Z -Wave alarm if the system is armed ( this signal can be exploited by a siren or a Automation box for example ) .
The sensor can also be used for automatic control of lighting , depending on the brightness level. For example , the sensor sends a signal to the Z- Wave switch to turn on the light when the door opens and the room is dark .
The detector also ascend the brightness and temperature, or in case of significant change , and whenever opening / closing is detected.
Z -Wave controller ( remote dongle ... ) is required to integrate the detector in your network if you already have an existing network.
FUNCTIONS :
• Detector 3 in 1 : Opening , temperature, light
• Adopts the latest Z-Wave chip 400series to support multichannel operations and a higher data rate ( 9.6/40/100kbps )
• Use the Z- Wave SDK 6.02
• Scope of the antenna optimized
• Use for home automation and security applications
• Button to include / exclude the detector
• Tamper
• Low battery indication
• Small, discreet and aesthetic
• Ease of use and installation
SPECIFICATIONS:
• Module Type : Z- Wave Transmitter
• Power supply: one 3V CR123A
• Long battery life : 3 years ( 14 trips per day)
• Frequency: 868.42 MHz
• Transmission distance : 30m indoor
• Temperature sensor: -10 to 70 ° C
• Light sensor : 0-500 lux
• Dimensions:
Sensor: 28 x 96 x 23 mm
Magnet: 10 x 50 x 12 mm
• Weight: 52g
• Operating Temperature : -10 to 40 ° C
• Operating Humidity: 85% RH max
• CE Standard EN300 220-1
• Z- Wave Certification : ZC08 - 13050003
Specificaţii
Primary Controller Compatibility | |
---|---|
1 eeDomus+ | full compatible (detected as PHI_PST02) |
Fibaro Home Center 2 v4.160 | full compatible |
Fibaro Home Center Lite v v.4.160 | not compatible |
Vera Edge / Plus / Secure | Not Compatible - temperature and light level are passed. The door sensor does not work (yet). |
Zipabox/Zipaminicro/ZipaTile | not compatible |
Piper / Piper NV (v.1.7.1) | Not Tested |
Indigo | Not Tested |
jeedom | Not Tested |
Domoticz | Not Tested |
ZiHome | Not Tested |
49 Vera 3 | Not Tested |
49 Vera Lite | Not Tested |
Tech Data | |
50 IP Rating | |
51 FLiRS | |
51 Power Supply | |
52 Attachable Loads | |
53 Explorer Frames - NWI Support | 3V CR123A uno |
54 SDK | 6.02 |
55 App Version | |
56 Device Type | |
57 Peper1 Database link | |
95 Generic Device Class | |
96 Specific Device Class | |
97 Routing |