€ 38,01
Descriere
The TZ55S switch can be used to vary the lighting connected to it, either manually as a conventional switch or remotely via the Z-Wave + wireless protocol.
It can be included in the Z-Wave network to be controlled by a Z-Wave controller or remote control. The switch is equipped with an LED indicator to easily locate it in a dark room.
The TZ55S switch supports the association commands (Group 1). It is thus possible to associate up to 5 other devices to control them manually from the switch.
Each Z-Wave module functions as a wireless repeater with other modules, to ensure total coverage of your home.
Caution, this switch requires neutral to operate. A recessed box with a depth of 50mm and a diameter of 67mm is recommended for installation (SCHALB71322).
FUNCTIONS:
Order a lamp from a distance
Installs in place of an existing switch
Function Variation
Supports association commands (Group 1)
Local Load Control
Status LEDs
Specificaţii
| Primary Controller Compatibility | |
|---|---|
| 1 eeDomus+ | full compatible |
| Fibaro Home Center 2 v4.160 | Not tested |
| Fibaro Home Center Lite v v.4.160 | Not tested |
| Vera Edge / Plus / Secure | not tested |
| Zipabox/Zipaminicro/ZipaTile | no tested |
| Piper / Piper NV (v.1.7.1) | Not tested |
| Indigo | no tested |
| jeedom | Compatible |
| Domoticz | not tested |
| ZiHome | no tested |
| 49 Vera 3 | Not tested |
| 49 Vera Lite | Not tested |
| Tech Data | |
| 50 IP Rating | IP 20 |
| 51 FLiRS | No |
| 51 Power Supply | 230V |
| 52 Attachable Loads | 300W |
| 53 Explorer Frames - NWI Support | No |
| 54 SDK | |
| 55 App Version | |
| 56 Device Type | Slave with routing capabilities |
| 58 Z-Wave Alliance Product Link | |
| 95 Generic Device Class | Multilevel Switch |
| 96 Specific Device Class | Multilevel Power Switch |
| 97 Routing | Yes |
