A Z-Wave PC adapter enables home automation software running on a PC to interact with a Z-Wave network. PC-adapters either use the Universal System Bus (USB) or the RS 232 serial port or even GPIO. Depending on the software used the PC adapters usually act as static controller however there are USB adapter with built-in battery. They act as portable inclusion controller then. Via the PC-adapter PC software for home automation can control Z-Wave devices such as switches, dimmers or sensors and they can perform a broad range of functions such as time triggered events, scene selection and switching and much more.
Mini controller USB Z-Wave plus
€ 28,92
The dongle UZB1 connects your PC with a USB port wireless Z-Wave to control various device.....
Mini controller USB Z-Wave plus /Z-Way Controller Software
€ 77,69
The dongle UZB1 connects your PC with a USB port wireless Z-Wave to control various device.....
RaZberry 2 GPIO Z-Wave shield for RaspberryPi Z-Wave Plus
€ 48,76
The RaZberry turns every Raspberry PI into a Z-Wave Home Automation Gateway. The bundle of hardwa.....
USB 3G Dongle
€ 39,66
Plug and play in cloud 24/24h and 7/7 days, using the 3G network safe and fast! 3G USB dongle is .....
USB Dongle EnOcean
€ 30,50
The USB300 is a small USB bridge that connects a computer to the wireless network EnOcean: sensors, .....
USB Dongle Z-Wave Plus with Battery
€ 49,55
The Z-Stick Gen5 Aeon Labs controller connects to a USB port on your computer and is used .....
USB Controller Z-Wave Plus - Everspring
€ 20,58
The Z-Wave Plus controller Everspring connects to a USB port on your computer to allow co.....
Serial Adapter for boards
€ 26,00
The ZME_SERIAL is a little daughter board that connects a serial interface to the Wireless Z-Wave ne.....
