RGBW Z-Wave Plus Inverter Micromodule - Qubino


În Stoc
Cod produs:

Not yet rated
Spune-ţi opinia



Put colors in your life!

The Qubino RGBW dimmer module is designed to control your RGB / RGBW LED bulbs or bulbs to create countless color options, and includes 5 special stage effects (ocean, lightning, rainbow, snow and sun ). The wide range of colors allows you to "paint" your home to suit your mood. Highlight your favorite wall by illuminating an image in the tones you choose yourself. The module can work in combination with other Z-Wave devices in your home. You can remotely control it either from the Z-Wave network or from wall switches.

Choose from 16 million different shades. Change the colors of your rooms and objects and create lighting effects on exterior surfaces such as the deck, driveway or even the contours of your home. After work, come home in a relaxing atmosphere created by a pre-set lighting scene.

Use it to decorate your kitchen countertop or to turn on the shower or mirror in your bathroom. Whatever the weather outside, let your living room radiate in warm and welcoming colors of a rainbow. And all this by just tapping on your smartphone or tablet!

With what use?
The RGBW dimmer module is ideal for dimming RGB / RGBW bands, LED stripes and bulbs, or even halogen bulbs. It can create different lighting effects (scenes) and adjust the color and intensity of the light source.

The smallest RGBW module.
The Qubino RGBW drive module occupies a smaller volume than comparable modules from any other brand and easily fits into any built-in mounting box.

Remarkably versatile.
The Qubino RGBW dimmer module can operate over a wide temperature range from 0 ° C to 40 ° C. It is used to mix RGB / RGBW / LED strip colors and LED bulbs. Each module also acts as a repeater to improve the range and stability of the Z-Wave network.

The simplest installation.
With an extremely small size and a specially designed housing, the connection of the module to a recessed box is simple. The installation process, tested and approved by professional electricians, consists of only three simple steps:

  • Remove the switches from the box and disconnect the wires.
  • Connect the wires to the Qubino module and insert it into the box.
  • Attach the switches to the box.


  • Wireless RGB Controller
  • Compatible with RGB and RGBW LED stripes
  • Compatible with any 12V or 24V light source
  • Integrates the Z-Wave 500 series chip (Z-Wave +)
  • 250% faster communication compared to standard Z-Wave devices
  • The world's smallest RGBW dimmer module
  • Specially designed design for ease of installation (easy to attach cables), tested by professional electricians
  • 4 binary inputs are used to connect bistable or push buttons, etc.


  • Power supply: 12-24VDC
  • Power consumption: 0.48W under 12V, 0.72W at 24V
  • PWM Output Frequency: 488Hz
  • Output power: 8A per channel, 13A max total (3.25A recommended for each channel in RGBW use)
  • Maximum load (eg halogen lamps):
    • 12VDC: 156W combined
    • 24VDC: 312W combined
  • Radio transmission frequency: 868.42MHz, Z-Wave
  • Range: up to 30 m indoors (depending on surrounding materials)
  • Operating temperature: -10 ~ 40 ° C
  • Space required for installation: Ø 60mm
  • Dimensions (W x H x D): 40.5 mm x 32 mm x 14.5 mm
  • Weight: 25g
  • Certifications: CE, RoHs


Primary Controller Compatibility
1 eeDomus+ Full Compatible
Fibaro Home Center 2 v4.160 Not Tested
Fibaro Home Center Lite v v.4.160 Not Tested
Vera Edge / Plus / Secure Not Tested
Zipabox/Zipaminicro/ZipaTile Not Tested
Piper / Piper NV (v.1.7.1) Not Compatible
Indigo Not Tested
jeedom Not Tested
Z-Wave.me / Z-Way / PoPP Hub Not Tested
Domoticz Not Tested
Tech Data
51 Power Supply 12-24VDC
52 Attachable Loads 12VDC: 156W 24VDC: 312W
53 Explorer Frames - NWI Support Yes
54 SDK 6.51.06
56 Device Type Light Dimmer Switch
58 Z-Wave Alliance Product Link http://products.z-wavealliance.org/products/2174
90 Incluison Include the R.G.B.W. color LED Dimmer intor the Z-Wave network, press service button 3 times in 2 seconds.If the device is properly include the green light will remains on.
91 Exclusion Exclude the Flush RGBW Dimmer into Z-Wave network, press 3 times in 2 seconds.If the device is proporly excluded, the green light will blink and data will bereset to the factory default values.
92 Factory Reset Please note that re-including the proudct will reset the data to the default values. Use this procedure only in the event that the network primary controller is missing or otherwise inoperable.

Opinii (0)

Spune-ţi opinia

Notă: Codul HTML este citit ca şi text!

Rău            Bun


Z-Wave Romania

The On-line shop for home automation Z-Wave products. Based in Spain, we deliver all over the world. Z-Wave is the international standard for wireless networking of home control systems. You can manage lighting, electricity, blinds, alarms etc ... Z-Wave products from different vendors work well together allowing control of smart home.

Contact Us