Double ON/OFF Relay Switch 2x1,5kW with metering - ZIPATO Z-Wave Plus

48,76

Disponibilitate:
In Stock
Cod produs:
ES-22-ZIP-PAN04-EU
Producător:
Zipato

Not yet rated
Spune-ţi opinia

Descriere

Micromodul PAN04 dual switch allows you to control two lights or two devices remotely using the Z-Wave Plus protocol while maintaining your existing switches. You will therefore be able to operate connected loads using existing switches , transmitter Z -Wave or directly from this button on the micro-module .

With its calibration technology , the PAN04 can be used to turn on and off many types of lamps, for example incandescent, fluorescent and LED .

In addition, this micro-module is capable of transmitting the instantaneous power consumption (W) and cumulative ( KWh) equipment attached to it . It also features protection against overload .

Z -Wave controller ( remote dongle ... ) is necessary to integrate this module in your network if you already have an existing network.

This Z -Wave module functions as a wireless repeater with other modules to ensure full coverage of your home.

Warning , this module requires the neutral to operate.


FUNCTIONS :

  •     Order two lights / appliances remotely
  •     Moved behind existing switches
  •     Use with rocker switch or pulse
  •     Adopts the latest Z- Wave chip 500series to support multichannel operations and a higher data rate ( 9.6/40/100kbps )
  •     SDK uses the Z -Wave 6.02
  •     Range of the antenna optimized
  •     Auto function inclusion
  •     ON / OFF function
  •     Measurement of the instantaneous and cumulative consumption
  •     Protection against overload
  •     Automatic status report after manual load control via the switch
  •     Automatic ratio of consumption at a 5% change
  •     Very low power consumption, complies with the European Directive 2009/125/EC no. 1275/2008
  •     Small, discreet and aesthetic
  •     Ease of use and installation


SPECIFICATIONS:

  •     Module Type : Z- Wave Receiver
  •     Power supply: 90 ~ 240VAC or 24 -60V DC ± 10%
  •     Standby power consumption: 0.48 W
  •     Wiring: 3 son , neutral required
  •     Maximum load: 1500W per output
  •     Frequency: 868.42 Mhz
  •     Transmission distance : 30m indoor / 70m outdoor
  •     Dimensions: 46x22x162 mm
  •     Weight: 39g
  •     Operating temperature : 0-40 ° C
  •     Z- Wave Certification : ZC08 - 13040018

 

Specificaţii

Primary Controller Compatibility
1 eeDomus+ Full Compatible
Fibaro Home Center 2 v4.160 Partial. No meter
Fibaro Home Center Lite v v.4.160 Partial. No meter
Zipabox/Zipaminicro/ZipaTile Full Compatible
Piper / Piper NV (v.1.7.1)
Indigo Compatible (Testing)
jeedom
Z-Wave.me / Z-Way / PoPP Hub Full Compatible
Domoticz Compatible (Testing)
ZiHome
49 Vera 3 Compatible (Testing)
49 Vera Lite Compatible (Testing)
Tech Data
51 Power Supply 230 V AC
53 Explorer Frames - NWI Support Yes
54 SDK 6.51.02
55 App Version 1.4
56 Device Type Binary Power Switch

Opinii (0)

Spune-ţi opinia

Notă: Codul HTML este citit ca şi text!

Rău            Bun


Continuare

Z-Wave Romania

The On-line shop for home automation Z-Wave products. Based in Spain, we deliver all over the world. Z-Wave is the international standard for wireless networking of home control systems. You can manage lighting, electricity, blinds, alarms etc ... Z-Wave products from different vendors work well together allowing control of smart home.

Contact Us

Mobile
+34610266723
e-mail
info@domoticadavinci.com
Skype
josemiguel.rubiovaras

Facebook