€ 49,58
Descriere
The new EUROtronic Thermostat has a brand new design. You can change the panels (available as an accessory) and customize the thermostat to your personal preferences. Z-Wave users get a lot of new features.
The unit is equipped with FLiRS (Frequently Listening Receiver Slave) and responds immediately to incoming commands from the Z-Wave controller. In addition, the device can be connected to an external Z-Wave temperature sensor. Thus, the thermostat refers to the temperature of the external sensor, which can be placed in the middle of the room. The thermostat display is backlit and has a large LCD screen. In addition, you can also lock the buttons on it with built-in child protection. The multi-colored LED of the central button allows intuitive operation as the user is prompted to follow the instruction based on the flashing LED of the central button.
The Spirit Z-Wave Plus thermostatic head comes with silver accessories for the battery compartment and decorative ring. In addition, a neutral white battery compartment is included.
This thermostatic head can be used as a heating thermostat or as an actuator depending on the configuration of the device. The measured temperature or the position of the thermostat actuator is transmitted to the Z-Wave controller.
FUNCTIONS:
- Replaces the thermostatic head of your radiator
- Mange your radiator remotely
- Z-Wave + technology
- Save up to 30% on your heating costs "Open window" detection
- Child protection
- 3 adapters (Danfoss RA, Danfoss RAV, Danfoss RAVL) included
- Various colors of battery compartment and decoration ring available separately
- Easy installation
TECHNICAL CHARACTERISTICS :
- Power supply: 2 x 1.5V LR6 / AA
- Transmission frequency: 868.42MHz
- Range: up to 30m indoor and 100m free field
- Connection: M30 x 1.5 mm
- Frequency of temperature measurement: Every minute
- Temperature range: 6 to 28 ° C
- Operating temperature: 0 to 50 ° C
- Protection class: IP20
- Dimensions (W x H x D): 56 x 68 x 89 mm
- Weight: 176g (batteries included)
MANUAL:
Specificaţii
| Primary Controller Compatibility | |
|---|---|
| 1 eeDomus+ | |
| Fibaro Home Center 2 v4.160 | Full Compatible |
| Fibaro Home Center Lite v v.4.160 | Full Compatible |
| Vera Edge / Plus / Secure | |
| Zipabox/Zipaminicro/ZipaTile | |
| Piper / Piper NV (v.1.7.1) | |
| Indigo | |
| jeedom | |
| Z-Wave.me / Z-Way / PoPP Hub v 3.2.1 | Maximum 4 devices at the same time |
| Domoticz | |
| ZiHome | |
| Somfy Tahoma | |
| Home Assistant | |
| Telldus | |
| Tech Data | |
| 50 IP Rating | Ip20 |
| 51 FLiRS | YES |
| 51 Power Supply | 2 x 1.5V LR6 / AA |
| 53 Explorer Frames - NWI Support | YES |
| 54 SDK | 6.71.01 |
| 55 App Version | HW: 49 FW: 0.15:00.08 |
| 56 Device Type | Thermostat - HVAC |
| 58 Z-Wave Alliance Product Link | https://products.z-wavealliance.org/products/2543 |
| Procedures | |
| 90 Incluison | Start Inclusion mode of your primary Z-Wave Controller. Press the Boost-Button. |
| 91 Exclusion | Start Exclusion mode of your primary Z-Wave Controller. Now press and hold the boost button of the Spirit Z-Wave Plus for at least 5 seconds. |
| 92 Factory Reset | Please use this procedure only when the network primary controller is missing or otherwise inoperable. Remove batteries. Press and hold boost button. While still holding boost button insert batteries. The LCD shows RES. Release boost button. To perform the factory reset press boost button. |
| 93 Wake Up | |
