Blind/Roller Shutter insert module Fibaro v3


În Stoc
Cod produs:

Not yet rated
Spune-ţi opinia


The Fibar Insert Motor Control FIB-FGR-223 allows controlling motors for jalousies, blinds, garage doors or other single-phase AC devices both wirelessly via Z-Wave and locally utilizing a traditional wall switch. This insert enables a precise positioning of motors with mechanical and electrical limit switch. In addition, this device has a power monitoring.

The device is placed in a wall box right behind the normal switch. The switch is not longer directly connected to the load but acts as input device for the Fibar insert that is controlling the load. The solution works with all switch design with or without neutral position as long as there is enough space in the wall box behind the switch. The device is just 15 mm height. The available space depends on the size of the traditional switch, the dimensions of the wall box and the amount of additional cabling placed in this box. This device is designed for a 3 wire system and needs a neutral wire in the wall box.


Product Highlights:

  • Controlled by Fibaro System devices or any Z-Wave controller
  • Microprocessor control
  • Executive elements: relays
  • Connected motor’s current and historical power consumption measured

Technical Data:

Power Supply 110 - 230 V ±10% 50/60Hz
Supplied motor type Single phase, VAC
Supported limit switches type Electronic and mechanic
Power of supplied motor up to 1kW for 230V
up to 500W for 110V
In accordance with EU standards LVD (2006/95/EC)
EMC (2004/10B/EC)
Circuit Temperature limit 105 °C
Operational Temperature 0 - 40 °C
For installation in boxes Ø ≥ 50mm
Radio protocol Z-Wave +
Radio Frequency 868,4 MHz EU;
Radio signal power 1mW
Range up to 100m outdoors
up to 30m indoors
(depending on building materials
Dimensions (L x W x H) 42 x 37 x 17 mm
Electricity consumption < 0,8W



Made in Poland
Primary Controller Compatibility
1 eeDomus+ full compatible
Fibaro Home Center 2 v4.160 full compatible
Fibaro Home Center Lite v v.4.160 full compatible
Vera Edge / Plus / Secure Full Compatible
Zipabox/Zipaminicro/ZipaTile full compatible
Piper / Piper NV (v.1.7.1) No tested
Indigo Compatible (Testing)
jeedom Full Compatible
Domoticz full compatible
ZiHome full compatible
49 Vera 3 full compatible
49 Vera Lite full compatible

Opinii (0)

Spune-ţi opinia

Notă: Codul HTML este citit ca şi text!

Rău            Bun


Z-Wave Romania

The On-line shop for home automation Z-Wave products. Based in Spain, we deliver all over the world. Z-Wave is the international standard for wireless networking of home control systems. You can manage lighting, electricity, blinds, alarms etc ... Z-Wave products from different vendors work well together allowing control of smart home.

Contact Us