€ 29,00
Descriere
The S213 adapter is used to install the Fibaro® Switch FGS-213 module on a DIN type rail in the electrical panel.
The S213 adapter consists of a housing and an electronic board, on which the Switch FGS-213 module is mounted. The housing dimensions are suitable for a standard DIN rail.
The electronic board contains a set of screw terminals, where all wires (power, input and output signals, control buttons) can be connected securely.
Functions:
- DIN adapter for Fibaro Switch FGS-213 without/with push buttons
- Used to install the Fibaro Switch FGS-213 module on DIN rail type TH35 / TS35 in the electrical panel
- Free location on the label to locate the line checked
Technical Characteristics :
- Supply voltage: 230 V AC +/- 10%, 50-60Hz
- Load power: max 8A
- Dimensions: 34.8 x 87.3 x 64.7 mm
- Width in TE units: 2 TE modules
- Wire conductor section: max. 2.5 mm2
- Maximum length of wires connected to inputs Sx, S1, S2: 20m
- Operating temperature: 0 ° C to +50 ° C
- Relative humidity: ≤90%, no condensation
Regulation:
- LVD 2014/35 / CE
- RoHS 2011/65 / EU
Manual:
Specificaţii
| Tech Data | |
|---|---|
| 50 IP Rating | IP20 |
