Micromodule Single Switch Hidden Z-Wave Plus Nano Switch - Aeon Labs


În Stoc
Cod produs:

Not yet rated
Spune-ţi opinia


Check any switches. Check any plug. Everywhere. Wireless.

Sockets and light switches are amazing inventions. They literally changed the world. But if you are not standing next to them or you can not reach them, they are limited. Not anymore. The future is smarter. So this is your home.

The Nano Switch offers complete wireless control of your switches and outlets.

Total control.

The Nano Switch offers total control, easily. Extremely small, each Nano Switch installs invisibly behind one of the existing switches or outlets in your home. Simply unscrew the front, install the Nano Switch behind it, and you now have a complete wireless control. Your old switches are instantly modern and connected.

Attention, this module requires the neutral to function.


  • Order Lighting / Remote
  • Installs behind an existing switch ON / OFF function
  • Potential free relay
  • Incorporates the Z-Wave 500 series chip
  • 250% faster communication compared to standard Z-Wave devices
  • Automatic detection of switch type
  • Protected against overloads and surges
  • Compatible with all Z-Wave and Z-Wave Plus controllers
  • Function for instantaneous and cumulative consumption 2 configurable inputs for switches
  • Connector for Touch Panel Switch (coming soon)
  • Use with toggle or pulse switch
  • Small, discreet and aesthetic
  • Ease of use and installation


  • Module Type: Z-Wave Receiver
  • Power supply: 120-230VAC, 50 / 60Hz
  • Standby Power Consumption: 0.8W
  • Wiring: 3 wires
  • Max load: 10A
  • Status indicator: LED
  • Frequency: 868.42 Mhz
  • Transmission distance: 150m in open field
  • Dimensions: 42mm x 39.5mm x 20mm
  • Operating Temperature Range: 0-40 ° C
  • Operating Humidity: 8-80%
  • Certifications: FCC, UL, CE, ROHS


Primary Controller Compatibility
1 eeDomus+ Full compatible
Fibaro Home Center 2 v4.160 Not tested
Fibaro Home Center Lite v v.4.160 Not tested
Vera Edge / Plus / Secure Not tested
Zipabox/Zipaminicro/ZipaTile Not tested
Piper / Piper NV (v.1.7.1) Not tested
Indigo Not tested
jeedom Full compatible
Z-Wave.me / Z-Way / PoPP Hub Not tested
Domoticz Not tested
ZiHome Not tested
Tech Data
51 Power Supply 120-230VAC, 50 / 60Hz
52 Attachable Loads 10A
53 Explorer Frames - NWI Support Yes
54 SDK 6.51.09
55 App Version FW: 1.01:01.00
56 Device Type On/Off Power Switch
58 Z-Wave Alliance Product Link https://products.z-wavealliance.org/products/2289
90 Incluison Turn the primary controller of Z-Wave network into inclusion mode, short press the product’s Action button that you can find on the product's housing.
91 Exclusion Turn the primary controller of Z-Wave network into exclusion mode, short press the product’s Action button that you can find on the product's housing.
92 Factory Reset Press and hold the Action button that you can find on the product's housing for 20 seconds and then release. This procedure should only be used when the primary controller is inoperable.

Opinii (0)

Spune-ţi opinia

Notă: Codul HTML este citit ca şi text!

Rău            Bun


Z-Wave Romania

The On-line shop for home automation Z-Wave products. Based in Spain, we deliver all over the world. Z-Wave is the international standard for wireless networking of home control systems. You can manage lighting, electricity, blinds, alarms etc ... Z-Wave products from different vendors work well together allowing control of smart home.

Contact Us