Smart Module FGS-214 - 1 Dry Contact - Fibaro

Switch micromodule Z-Wave + FIBARO Smart Module

The FIBARO Simart Module has been designed to activate and deactivate electrical devices. Thanks to its small size, it can be installed in junction boxes or flush-mounted boxes. The module is controlled either by the Z-Wave network or a simple switch. Connect your FIBARO Smart Module to your Z-Wave system and other devices to take advantage of almost endless possibilities!

This module has a potential-free relay (dry contact) with a timer function (used to create a pulse), so it can be used either to switch a conventional 230V voltage, or any type of DC power supply (5V, 12V .. 24V DC). Thus, it can be used to control any type of load such as a boiler (by plugging in the dry contact instead of a thermostat) or a motorized gate, garage door ...

Convenient terminal blocks - Easy installation

The FIBARO Smart Module is fitted with sockets which have an increased cross-section which allows you to connect it to wires with a larger diameter and to simplify the installation process.

User-friendly configuration menu

The integrated RGB diode is a great help during the installation process. The light will show if the FIBARO Smart Module has been added or removed from the network. You can also see if a calibration or update was successful.

Z-Wave network coverage tester

Use the FIBARO Smart Module to check the signal quality in the Z-Wave network. The built-in RGB LED will help you to check if the place you have selected for installation is within its reach.

Software updates

You can update the software of your FIBARO Smart Module to the latest version, once it is available. This way you have access to the latest features without having to purchase the latest version of the device.

Easy to install

Simply place the module in the installation box and connect it to an existing installation. The miniature size of the module allows you to place it in many convenient places.

Scene management

Even the most complex actions can be activated by a wall switch connected to a module. With the push of a button when entering a room, it's as natural as turning on the lights. 1 to 3 presses and a long press can be assigned to four different actions.

Your mobile device is your remote control

You can control modules and receive information through your personal computers and mobile devices. The FIBARO Single Switch 2 does not require expensive control panels to operate.

Please note, this module requires neutral to operate.

FUNCTIONS:

• Control a light / device remotely Installs behind an existing switch (bi-stable or mono-stable)
• ON / OFF function Potential-free relay (Gate, boiler, garage door control, etc.)
• Integrates the Z-Wave 500 series chip 250% faster communication compared to standard Z-Wave devices Integrated scene activation mechanism (via S2)
• Safety communication and notification classes Configuration menu with a diode
• Supports secure mode (Z-Wave Network Security) encrypted with AES-128 encoding Integrated
• Z-Wave network coverage tester OTA software update (depends on the controller)
• Larger terminal blocks for easier wiring
• Rounded shape to meet the highest standards Small, discreet and aesthetic
• Ease of use and installation

TECHNICAL CHARACTERISTICS :

• Type of module: Z-Wave receiver
• Power supply: 100 - 240V ~, 50 / 60Hz or 24 - 30 Vdc
• Wiring: 3 wires, neutral required (230V)
• Max power: 6.5A (resistive load) - 2A (inductive load) - 1A (capacitive load)
• Frequency: 868.42 Mhz
• Transmission distance: 50m free field, 40m indoors (depends on the structure of the building)
• Signal strength: 1mW Dimensions: 42.5mm x 38.25mm x 20.3mm (L x W x H)
• Operating temperature: 0-35 ° C
• Standards: CE, ROHS, 2011/65 / EU, 2014/53 / EU, 2015/863, ZWAVE PLUS

All documentation and instructions for Fibaro products are available on manuals.fibaro.com

Spune-ţi opinia

Introduceţi codul din imagine: