Smart Roller Shutter module Z-Wave Plus - wiDom

WiDom Smart Roller Shutter is an "in wall device", for the multilevel control of roller shutter motors.

​​

It can accurately control the opening and closing of blinds, curtains, shutters, venetian blinds as requested by the user through local commands or remotely using computers, smartphones, tablets. At the same time, it is completely configurable so that it can adapt to the most varied customers’ needs, while being ready for use without needing additional configurations in order to operate.

After an initial calibration procedure, thanks to a proprietary algorithm, WiDom Smart Roller Shutter is able to identify the exact position of the roller shutter without using external sensors. During the operation, a continuous and automatic control of the limit switches allows maintaining the calibration.

In the absence of a power source, the system runs a self-repositioning procedure that restores calibration. The device is equipped with contact protection technology (Zero Crossing) which reduces the electrical stress on the relay contacts and ensures a longer life. The open / closed switching of the device always occur when the instantaneous value of voltage is 0. It operates in any Z-Wave network with other Z-Wave/Z-Wave Plus certified devices and controllers from any other manufacturer.

As a constantly powered node, WiDom Smart Roller Shutter will act as repeater regardless of the vendor in order to increase the reliability of the network.

Technical Specification

• Power supply 110 - 230 VAC±10% 50/60 Hz
• Maximum Load 1200 Watt
• System temperature limitation 105°C
• Work temperature From -10° to 40° C
• Power consumption < 230 mW in standby mode < 500 mW when motor is moving
• Protection system S0 and S2
• Security Maximum distance up to 100 m outdoor up to 40 m indoor
• Dimensions 37x37x17 mm
• Actuator element Relay
• Compliance CE, RoHs Electrical
• IP Rating IP20

Spune-ţi opinia

Introduceţi codul din imagine: