-600x600.JPG "Indoor light with LED - RS LED D2 - Z-Wave Plus - STEINEL")
 1-600x600.JPG "Indoor light with LED - RS LED D2 - Z-Wave Plus - STEINEL")
 2-600x600.JPG "Indoor light with LED - RS LED D2 - Z-Wave Plus - STEINEL")
€ 106,61
Descriere
The STEINEL Indoor light RS LED D2 is the connection between hugh functionality and visuell high quality design. It fits perfectly into corridors, hallways, staircases as well as bath rooms and the light convinces with technical highlights and intelligent technologie.
Because of the integrated high frequency sensor the light turn on and turn off without any noises and without touching a switch. The pleasant LED light with a range of 3m till 8m lights up the room very comfortable. The ambient light causes a additional light highlight. The integration is so easy like the installation (on ceilings and walls) and it is possible to integrate the indoor light in every Z-Wave network you want.
The Installation of an attractive as well as intelligent light system is no more a problem with the STEINEL Indoor light RS LED D2.
Technical Characteristics:
- LED light for the indoor area with 360° high frequency sensor and ambient light
- Attractive design with brushed stainless steel frame
- Perfect for corridors, hallwasy, staircases and bath rooms
- Motion sensor and brightness meter
- Installtion on ceilings and walls possible
- Range of sensor: 3-8m
- Freely selectable time setting, range, radar sensitivity, etc.
- Light color: warm white
- Power supply: 220-240V, 50/60Hz
- IP class: IP20
- Light range: 2-2000 Lux
- Wireless technology: Z-Wave Plus
Specificaţii
| Primary Controller Compatibility | |
|---|---|
| 1 eeDomus+ | Not Tested |
| Fibaro Home Center 2 v4.160 | partly compatible |
| Fibaro Home Center Lite v v.4.160 | partly compatible |
| Vera Edge / Plus / Secure | partly compatible |
| Zipabox/Zipaminicro/ZipaTile | partly compatible |
| Piper / Piper NV (v.1.7.1) | Not Tested |
| Indigo | Not Tested |
| jeedom | Not Tested |
| Z-Wave.me / Z-Way / PoPP Hub v 3.2.1 | fully compatible |
| Domoticz | Not Tested |
| OpenHAB | Not Tested |
| ZiHome | Not Tested |
| Somfy Tahoma | Not Tested |
| Home Assistant | Not Tested |
| Telldus | Not Tested |
| Tech Data | |
| 50 IP Rating | IP20 |
| 51 Power Supply | 220-240V, 50/60Hz |
| 52 Attachable Loads | LED Included |
| 53 Explorer Frames - NWI Support | Yes |
| 54 SDK | 6.51.09 |
| 55 App Version | HW: 1 FW: 1.0:1.0 |
| 56 Device Type | On/Off Power Switch |
| 58 Z-Wave Alliance Product Link | https://products.z-wavealliance.org/products/2243 |
| S2 Security Frame | No |
| Procedures | |
| 90 Incluison | Inclusion: Add Adding RS LED D2 to the Smart Friends system: 1 Download Smart Friends app from the app store. 2 In the rooms view, activate the edit mode. 3 Select the chosen room and press the "Add device" button. 4 Briefly press button 5 on the device to set it to inclusion mode. Status LED 8 lights up to show that this mode is selected. 5 The app displays a confirmation message once inclusion has been successfully completed. |
| 91 Exclusion | Removing RS LED D2 from the Smart Friends system: 1 In the rooms view, activate the edit mode. 2. Select the device in the chosen room and press the "delete" button. Press delete and follow the instructions in the app. 3 Briefly press button e on the device to set it to exclusion mode. The red status LED h lights up to show that this mode is selected. 4 The app displays a confirmation message once exclusion has been successfully completed. |
| 92 Factory Reset | Returning RS LED D2 to factory settings: Please use this procedure only when the network primary controller is missing or otherwise inoperable. 1 Briefly press button e and directly afterwards keep it pressed for 5 seconds. 2 Status LED h briefly flashes to show that the light has been reset. 3 The device is now no longer included in the Z-Wave system and has been returned to factory settings. |
