Blind/Roller Shutter insert module - Philio

Micromodule for roller shutter PAN08 will allow you to control a motorized equipment such as store , garage door , gate or shutter using the Z-Wave protocol while maintaining your existing switch . You will therefore be able to operate the motor connected using the existing switch , a transmitter Z -Wave or directly from this button on the micro-module .

With its calibration technology , the PAN08 can be used to control many types of shutters. This module is able to detect the position of the component by using the measuring method of power , so that it can be remotely controlled not only fully up or down, but can also be set for example to 30 % or 50 % .

Z -Wave controller ( remote dongle ... ) is necessary to integrate this module in your network if you already have an existing network.

This Z -Wave module functions as a wireless repeater with other modules to ensure full coverage of your home.

Warning , this module requires the neutral to operate.

FUNCTIONS:

•     Order your blinds or shutters remote
•     Moved behind existing switches
•     Adopts the latest Z- Wave chip 400series to support multichannel operations and a higher data rate ( 9.6/40/100kbps )
•     SDK uses the Z -Wave 6.02
•     Range of the antenna optimized
•     Auto function inclusion
•     Function up / down and positioning
•     Protection against overload
•     Very low power consumption, complies with the European Directive 2009/125/EC no. 1275/2008
•     Small, discreet and aesthetic
•     Ease of use and installation

SPECIFICATIONS:

•     Module Type : Z- Wave Receiver
•     Power supply: 90 ~ 240VAC
•     Standby power consumption: 0.48 W
•     Wiring: 3 son , neutral required
•     Maximum load : 1100W
•     Frequency: 868.42 Mhz
•     Transmission distance : 30m
•     Dimensions: 47.5x39x15.6 mm
•     Weight: 30g
•     Operating temperature : 0-40 ° C
•     Z- Wave Certification : ZC08 - 13070030 , ZC08 - 13080002

Spune-ţi opinia

Introduceţi codul din imagine: