Thermostat Fan Coil 4Pipes MH8 series - MCO HOME

123,96

Disponibilitate:
În Stoc
Cod produs:
ES-41-MCO-MH8-FC
Producător:
MCO HOME

Not yet rated
Spune-ţi opinia

Descriere

The MCOHome fan coil thermostat is a Z-Wave compatible device for indoor temperature control. It is mainly used with a 2-pipe fan coil system. It measures the ambient temperature and knows the local time, so it can automatically control the fan speed according to the temperature difference. This thermostat can be included and operated in a Z-Wave network with other Z-Wave certified devices from any other manufacturer. Each Z-Wave powered module works like a wireless repeater with other modules, to ensure total coverage of your home.

FUNCTIONS:

  • Thermostat for 2-pipe fan coil unit Intelligent on / off control of a 3-speed fan or electric valve
  • Ventilation, heating, cooling mode LCD display
  • Display of time and temperature
  • Temperature Calibration
  • Non-volatile memory to keep the operating state after a power failure
  • Z-Wave Plus Compatible
  • Glass finish, modern design Capacitive Touch Buttons

 TECHNICAL CHARACTERISTICS:

  • Module Type: Z-Wave Receiver
  • Material: Tempered glass and plastic (PC Alloy)
  • Power supply: 230VAC, 50 / 60HZ
  • Maximum load: 3A
  • Power consumption: <1W
  • Frequency: 868.42 Mhz
  • Range: up to 30 m
  • Temperature Sensor: NTC 15K
  • Display accuracy: 0.1 ° C
  • Operating Temperature Range: 0-55 ° C
  • Temperature setting: 5-35 ° C
  • Dimensions: 86 x 86 x 42 mm
  • Installation: Wall (vertical), square box 86 x 86 mm
  •  
 

Specificaţii

Primary Controller Compatibility
1 eeDomus+ Compatible but fan coil speed management
Fibaro Home Center 2 v4.130 Not compatible
3 Fibaro Home Center Lite v v.4.080 Not compatible
4 Vera Edge / Plus Not compatible
5 Zipabox/Zipamini/ZipaTile Not compatible
6 Piper / Piper NV (v.1.7.1) Not compatible
Indigo Not Tested
8 jeedom Not Tested
Z-Wave.me / Z-Way / PoPP Hub Not Compatible
10 Domoticz Not Tested
11 OpenHAB Not Tested
Tech Data
50 IP Rating IP20
51 Power Supply 230 V AC
52 Attachable Loads 3A
53 Explorer Frames - NWI Support
54 SDK
55 App Version
56 Device Type
58 Z-Wave Alliance Product Link
Procedures
90 Incluison Under the shutdown state, press & hold to enter interface for inclusion or exclusion of Z-Wave network. Before device included into network, “- - -” will display on the screen. Then press once, device will enter learning mode to get a node ID. If inclusion is success, a node ID will display on the screen in a few seconds. A node ID can always inform us whether the device is in the network or not.
91 Exclusion Under the shutdown state, press & hold to enter interface for inclusion or exclusion of Z-Wave network. Before device included into network, “- - -” will display on the screen. Then press once, device will enter learning mode to get a node ID. If inclusion is success, a node ID will display on the screen in a few seconds. A node ID can always inform us whether the device is in the network or not.
92 Factory Reset

Opinii (0)

Spune-ţi opinia

Notă: Codul HTML este citit ca şi text!

Rău            Bun


Continuare

Z-Wave Romania

The On-line shop for home automation Z-Wave products. Based in Spain, we deliver all over the world. Z-Wave is the international standard for wireless networking of home control systems. You can manage lighting, electricity, blinds, alarms etc ... Z-Wave products from different vendors work well together allowing control of smart home.

Contact Us

+34600612889
+34600612889
danyvizariu@gmail.com
danyvizariu@gmail.com
danyvizariu
danyvizariu

Facebook