€ 67,77
Descriere
The Remotec ZXT-600 is a Z-Wave to IR bridge that uses Z-Wave Plus technology to control air conditioners by receiving Z-Wave commands and translating them into infrared controls. With its built-in IR (library) database and stored in the cloud, the ZXT-600 can control different makes and models of air conditioners around the world.
The ZXT-600 is a secure Z-Wave Plus device. A Z-Wave Plus controller supporting the security framework must be used to fully utilize the product. The ZXT-600 is a Z-Wave slave device, it depends on the controller to configure the particular brand of air conditioner with a correct IR code. Each controller or home automation box has a different user interface for installation.
FEATURES:
- Control your air conditioner with Z-Wave thermostat controls
- Works as a Z-Wave thermostat
- Z-Wave to IR converter
- Z-Wave Plus compatible Integrated temperature sensor
- Integrated IR code library and updated from the cloud
- Learning function Operates on battery (2x AA batteries) or USB power
- 3.5mm jack output for external IR transmitter
TECHNICAL CHARACTERISTICS:
- Module type: Slave Z-Wave
- Power supply: 2x AA batteries or power supply USB
- Z-Wave Frequency: 868.42MHz
- Z-Wave range: 40m in free field
- IR Frequency: 38kHz IR range: 7 to 10m in free field
- Measuring range of the temperature: 0-40 ° C
- Operating temperature: 0 to 40 ° C
- Storage temperature: -10 to 50 ° C
- Dimensions: 128mm x 78mm x 22mm
- Weight: 84g (without batteries)
Manual
Specificaţii
| Primary Controller Compatibility | |
|---|---|
| 1 eeDomus+ | Full Compatible |
| Fibaro Home Center 2 v4.160 | Not Tested |
| Fibaro Home Center Lite v v.4.160 | Not Tested |
| Vera Edge / Plus / Secure | Not Tested |
| Zipabox/Zipaminicro/ZipaTile | Not Tested |
| Piper / Piper NV (v.1.7.1) | Not Tested |
| Indigo | Not Tested |
| jeedom | Not Tested |
| Z-Wave.me / Z-Way / PoPP Hub v 3.2.1 | Not Tested |
| Domoticz | Not Tested |
| ZiHome | Not Tested |
| Somfy Tahoma | Not Tested |
| Home Assistant | Not Tested |
| Telldus | Not Tested |
| Tech Data | |
| 50 IP Rating | IP20 |
| 51 FLiRS | Yes |
| 51 Power Supply | 2x AA batteries or power supply USB |
| 53 Explorer Frames - NWI Support | Yes |
| 54 SDK | 6.61.00 |
| 55 App Version | HW: 3 FW: 1.00:01.01:171.01 |
| 56 Device Type | Thermostat - HVAC |
| 58 Z-Wave Alliance Product Link | https://products.z-wavealliance.org/products/2553 |
| Procedures | |
| 90 Incluison | 1, Refer to your primary controller to enter into the Inclusion Mode or Exclusion Mode 2, When it is prompted to enter it, please triple click the “PROG” button within 1 second. 3, Green Indicator flashes TWICE then stay off |
| 91 Exclusion | 1, Refer to your primary controller to enter into the Inclusion Mode or Exclusion Mode 2, When it is prompted to enter it, please triple click the “PROG” button within 1 second. 3, Green Indicator flashes TWICE then stay off |
| 92 Factory Reset | Press and Hold “PROG” button for 3 seconds on AC Master, the Green Indicator will light up. DO NOT Release the “PROG” Button until Green Indicator flashes TWICE. Remark : Please use this procedure only when the network primary controller is missing or otherwise inoperable. |
| 93 Wake Up | Press the "PROG" button to wakeup the unit |
