€ 74,34
Descriere
Lighting control. Device control. Scene control. Z-Wave control.
There are thousands of Z-Wave devices you can have in your home, but their control is never natural. Typically, you need to use your smartphone or start your computer.
The WallMote switch provides natural control to the connected home. This is the perfect Z-Wave controller. Wireless. Battery powered. Designed as a wall switch, but capable of controlling hundreds of devices from more than a dozen Z-Wave scenes.
The Aeotec WallMote Quad Switch is a smart Z-Wave portable controller that installs on the wall. It has 4 touch buttons that allow you to easily control Z-Wave devices in your home network by touching, long pressing or sliding on button areas.
Its surface is equipped with an RGB LED to indicate the actions of the buttons which are also accompanied by a sound feedback and vibration.
The WallMote Quad is also a security feature and supports the Over The Air (OTA) update feature for firmware upgrades.
Content:
- WallMote Quad
- Mounting bracket
- Double-sided headband
- Micro USB cable
FUNCTIONS:
Wall Switch
Ultra-compact and ultra-design
4 configurable buttons
Manages up to 8 devices / scenes
Rechargeable battery powered
Security of radio communication via AES-128 encryption
Incorporates the Z-Wave 500 series chip
250% faster communication compared to standard Z-Wave devices
Optimization of the antenna, range 120 meters
Firmware Updates Over The Air (OTA)
Ease of use and installation
TECHNICAL CHARACTERISTICS:
Module Type: Z-Wave Transmitter
Power: Rechargeable Lithium Battery, 3.7V, 640mAh
Input for recharging the battery: Micro USB port, DC 5V ± 0.5V, max 1A
Frequency: 868.42 MHz
Transmission distance: 120m in open field
Operating Temperature: 0 ° C to 40 ° C
Relative humidity: 8% to 80%
Dimensions: 76.8x76.8x9.3mm
Mounting Bracket Thickness: 1.5mm
User's Manual
Specificaţii
| Primary Controller Compatibility | |
|---|---|
| 1 eeDomus+ | Compatible |
| Fibaro Home Center 2 v4.160 | Compatible |
| Fibaro Home Center Lite v v.4.160 | Compatible |
| Vera Edge / Plus / Secure | Not tested |
| Zipabox/Zipaminicro/ZipaTile | Not tested |
| Piper / Piper NV (v.1.7.1) | Not tested |
| Indigo | Not tested |
| jeedom | Compatible |
| Z-Wave.me / Z-Way / PoPP Hub v 3.2.1 | Not tested |
| Domoticz | Not tested |
| OpenHAB | Not tested |
| ZiHome | Not tested |
| Tech Data | |
| 51 FLiRS | No |
| 51 Power Supply | Power: Rechargeable Lithium Battery, 3.7V, 640mAh Input for recharging the battery: Micro USB port, DC 5V ± 0.5V, max 1A |
| 53 Explorer Frames - NWI Support | Yes |
| 54 SDK | 6.61.00 |
| 55 App Version | 1.5 |
| 56 Device Type | Wall controller |
| 58 Z-Wave Alliance Product Link | http://products.z-wavealliance.org/products/2130 |
| Procedures | |
| 90 Incluison | Turn the primary controller of Z-Wave network into inclusion mode, short press the product’s Action button that you can find on the product's housing. |
| 91 Exclusion | Turn the primary controller of Z-Wave network into exclusion mode, short press the product’s Action button that you can find on the product's housing. |
| 92 Factory Reset | Press and hold the Action button that you can find on the product's housing for 20 seconds and then release. This procedure should only be used when the primary controller is inoperable. |
| 93 Wake Up | Remove your WallMote Quad unit from its Back Mounting Plate, press and hold the Action Button for 3 seconds(the buzzer chirp once and the orange LED will be ON) on the back of the WallMote Quad unit and then release it. This will trigger and send a wake up noti cation command to your controller/gateway, then your WallMote Quad will wake up for 10 minutes and the orange LED will fast blink while it is awake (if the WallMote Quad does not receive the Wake Up No More Info from the primary Controller). |
