Z-Wave cord switch SWIID

52,03

Disponibilitate:
În Stoc
Cod produs:
ES-21-SWI_ZCS-1
Producător:
Swiid

Not yet rated
Spune-ţi opinia

Opţiuni disponibile

Descriere

SwiidInter is the first switch cord into the Z-Wave home automation environment that is sufficiently small and discreet to be comparable to a conventional cord switch. It can be used both manually like any ordinary cord and switch remotely via Z-Wave controller.

The switch SwiidInter also provides opportunities for association and this in both directions. Thus, it can be operated automatically by another Z-Wave device of the same network, for example by the triggering of a presence detector. Conversely with a short press or a long press it can control two separate groups of Z-Wave devices that have been associated with it: for example, every other room where your SwiidInter light switch is located.

The SwiidInter switch installs just like a regular cord switch: so this is a quick and easy installation that requires no special tools. It must then be configured to fit into a "network" Z-Wave , the network can be as simple as a single remote that controls your SwiidInter remote switch.

A Z-Wave controller is required for control of the remote switch. The controller can be autonomous type remote or home automation controller. Many home automation controllers are compatible with SwiidInter: eedomus, ZiBASE, Zipabox, Vera, Home Center, HomeTroller Zee.

FEATURES:

  • Switch cord used both manually (short press) and remote radio (Z-Wave)
  • Replacement using a standard cord switch a lamp, a table or desk
  • ON / OFF function
  • Activation of a home automation scenario long press (Z-Wave association)
  • Dimensions comparable to a regular cord switch
  • Installs as a standard cord switch
  • Suitable for all types of lamp bulbs

SPECIFICATIONS:

  • Module type: receiver Z-Wave
  • Color: White / Black
  • Power supply: 230V ± 10% - 50Hz
  • Max power: 660W
  • Power consumption: < 0,08W
  • Protection: IP20
  • Radio protocol: Z- Wave® (SDK 4.55)
  • Radio frequency: 868.42 MHz (EU)
  • Dist . transmission: Up to 30m indoors (depends on the materials)
  • Temp. Operating: 0 - 40 ºC
  • Display on / off: blue LEDs
  • Dimensions: 84 x 32 x 29 mm
  • Standards EU: EN 61058-2-1: 2011 EN 55015

Specificaţii

Primary Controller Compatibility
1 eeDomus+ full compatible
Fibaro Home Center 2 v4.130 full compatible
3 Fibaro Home Center Lite v v.4.080 full compatible
4 Vera Edge / Plus full compatible
5 Zipabox/Zipamini/ZipaTile full compatible
6 Piper / Piper NV (v.1.7.1) full compatible
Indigo full compatible
8 jeedom full compatible
10 Domoticz full compatible
ZiHome full compatible
49 Vera 3 full compatible
49 Vera Lite full compatible
Tech Data
50 IP Rating IP20
51 FLiRS
51 Power Supply 230V ± 10 % - 50 Hz
52 Attachable Loads 660W
53 Explorer Frames - NWI Support
54 SDK
55 App Version
56 Device Type Slave with routing capabilities
57 Peper1 Database link
95 Generic Device Class Binary Switch
96 Specific Device Class Binary Power Switch
97 Routing

Opinii (0)

Spune-ţi opinia

Notă: Codul HTML este citit ca şi text!

Rău            Bun


Continuare

Z-Wave Romania

The On-line shop for home automation Z-Wave products. Based in Spain, we deliver all over the world. Z-Wave is the international standard for wireless networking of home control systems. You can manage lighting, electricity, blinds, alarms etc ... Z-Wave products from different vendors work well together allowing control of smart home.

Contact Us

+34600612889
+34600612889
danyvizariu@gmail.com
danyvizariu@gmail.com
danyvizariu
danyvizariu

Facebook