Sensor Temperature and Humidity - Z-Wave Plus - Philio

45,45

Disponibilitate:
În Stoc
Cod produs:
ES-11-PHI-EPAT02-B
Producător:
Philio Tech

Not yet rated
Spune-ţi opinia

Descriere

The Philio Sensor is a 2-in-1 Sensor. The sensor measures the humidity (in percent) and the temperature (in Celsius) of its environment. Furthermore the sensor has a tamperswitch, which works as a burglar alarm. By using Z-Wave all the information is transfered to the Gateway.

The 2-in-1 Sensor can be mounted on almost every surface in horizontal or vertical position. The sensor has a casing with a barred aperture for the measurement of the humidity. On the backside of the case there is the tamperswitch, which works as burglar alarm if the device is moved or manipulated.

Properties:

  • Z-Wave Plus
  • EU frequency: 868,42 MHz
  • Package content: 1x 2-in-1 Sensor incl. battery
  • Power supply: battery CR123A 3V
  • Battery lifetime: 7 years (depending on the wake-up interval)
     

With the Philio sensors you can easily make your home smarter and safer. The sensors are small, inconspicuously and fit on every surface. If you want to protect your home from burglars or other dangers like fire or water you can easily integrate the Philio Sensors to your Z-Wave Smart Home gateway.

Specificaţii

Primary Controller Compatibility
1 eeDomus+ not tested
Fibaro Home Center 2 v4.160 partly compatible/only usable in unsecure mode
Fibaro Home Center Lite v v.4.160 partly compatible/only usable in unsecure mode
Vera Edge / Plus / Secure fully compatible
Zipabox/Zipaminicro/ZipaTile not compatible
Piper / Piper NV (v.1.7.1) not tested
Indigo not tested
jeedom not tested
Z-Wave.me / Z-Way / PoPP Hub fully compatible
Domoticz not tested
OpenHAB not tested
ZiHome not tested
Somfy Tahoma not tested
Home Assistant not tested
Telldus not tested
Tech Data
50 IP Rating IP20
51 FLiRS battery CR123A 3V
51 Power Supply battery CR123A 3V
53 Explorer Frames - NWI Support Yes
54 SDK 6.51.06
55 App Version SD3502
56 Device Type Multilevel Sensor
58 Z-Wave Alliance Product Link https://products.z-wavealliance.org/products/1350
S2 Security Frame No
Procedures
90 Incluison 1. Have Z-Wave™ Controller entered inclusion mode. 2. Pressing the tamper key three times within 1.5 seconds to enter the inclusion mode. 3. After add successful, the device will wake to receive the setting command from Z-Wave™ Controller about 20 seconds.
91 Exclusion 1. Have Z-Wave™ Controller entered exclusion mode. 2. Pressing tamper key three times within 1.5 seconds to enter the exclusion mode. Node ID has been excluded.
92 Factory Reset Notice: Use this procedure only in the event that the primary controller is lost or otherwise inoperable. 1. Pressing tamper key four times within 1.5 seconds and do not release the tamper key in the 4 th pressed, and the LED will light ON. 2. After 3 seconds the LED will turn OFF, after that within 2 seconds, release the tamper key. If successful, the LED will light ON one second. Otherwise, the LED will flash once. 3. IDs are excluded and all settings will reset to factory default.
93 Wake Up When the device power on, the device will wake about 20 seconds. In this duration, the controller can communicate with the device. Normally the device is always sleeping to save the battery energy.

Opinii (0)

Spune-ţi opinia

Notă: Codul HTML este citit ca şi text!

Rău            Bun


Continuare

Z-Wave Romania

The On-line shop for home automation Z-Wave products. Based in Spain, we deliver all over the world. Z-Wave is the international standard for wireless networking of home control systems. You can manage lighting, electricity, blinds, alarms etc ... Z-Wave products from different vendors work well together allowing control of smart home.

Contact Us

+34600612889
+34600612889
danyvizariu@gmail.com
danyvizariu@gmail.com
danyvizariu
danyvizariu

Facebook