Micromodule single switch Z-Wave Plus FGS-213 - Fibaro

49,58

Disponibilitate:
În Stoc
Cod produs:
ES-22-FIB-FGS-213
Producător:
Fibaro

Not yet rated
Spune-ţi opinia

Descriere

Specificaţii

Primary Controller Compatibility
1 eeDomus+
Fibaro Home Center 2 v4.130 Full compatible
3 Fibaro Home Center Lite v v.4.080 Full compatible
4 Vera Edge / Plus
5 Zipabox/Zipamini/ZipaTile
6 Piper / Piper NV (v.1.7.1)
Indigo
8 jeedom
Z-Wave.me / Z-Way / PoPP Hub
10 Domoticz
ZiHome
Tech Data
53 Explorer Frames - NWI Support yes
54 SDK 6.51.06
55 App Version 3.2
56 Device Type On/Off Power Switch
58 Z-Wave Alliance Product Link http://products.z-wavealliance.org/products/1734
Procedures
90 Incluison 1) Switch off the mains voltage (disable the fuse). 2) Place the Switch 2 within the direct range of your Z-Wave controller. 3) Connect the device in accordance with one of the diagrams attached in the manual. 4) After verifying correctness of the connection switch on the mains voltage. 5) Identify the S1 switch or the B-button (located on the device’s housing). 6) Set the main controller in (security/non-security) add mode (see the controller’s manual). 7) Quickly, three times press the S1 switch or the B-button. 8) Wait for the adding process to end. 9) Successful adding will be confirmed by the Z-Wave controller’s message.
91 Exclusion 1) Place the Switch 2 within the direct range of your Z-Wave controller. 2) Identify the S1 switch or the B-button (located on the device’s housing). 3) Set the main controller in remove mode (see the controller’s manual). 4) Quickly, three times press the S1 switch or the B-button. 5) Wait for the removing process to end. 6) Successful removing will be confirmed by the Z-Wave controller’s message.
92 Factory Reset 1) Switch off the mains voltage (disable the fuse). 2) Remove the Switch 2 from the wall switch box. 3) Switch on the mains voltage. 4) Press and hold the B-button to enter the menu. 5) Wait for the visual LED indicator to glow yellow. 6) Quickly release and click the B-button again. 7) After few seconds the device will be restarted, which is signalled with the red LED indicator colour. Use reset procedure only if the primary controller is missing or inoperable.
93 Wake Up The FIBARO Single Switch 2 is powered with mains voltage so it is always awake.

Opinii (0)

Spune-ţi opinia

Notă: Codul HTML este citit ca şi text!

Rău            Bun


Continuare

Z-Wave Romania

The On-line shop for home automation Z-Wave products. Based in Spain, we deliver all over the world. Z-Wave is the international standard for wireless networking of home control systems. You can manage lighting, electricity, blinds, alarms etc ... Z-Wave products from different vendors work well together allowing control of smart home.

Contact Us

+34600612889
+34600612889
danyvizariu@gmail.com
danyvizariu@gmail.com
danyvizariu
danyvizariu

Facebook