Door and Window sensor with dry contact and analog sensor Fibaro


În Stoc
Cod produs:

Opţiuni disponibile


The Fibaro Door / Window Sensor is a battery powered, Z-Wave compatible reed sensor. It combines the functionality of 3 devices (reed, binary and temperature sensor) in one easy to use product. The sensor can be used for monitoring whether a door, window, window blind or a garage gate is opened or closed. In addition, you can integrate any binary output sensor with the Z-Wave network using this sensor, e.g. motion sensors, flood sensors, alarm system sensors, etc.

In addition, the sensor has an analog input allowing to connect a temperature sensor DS18B20 1-Wire.

The product consists of two elements. One of the parts is mounted on the moving part of the window or of the door. The other part is placed on the frame. The device needs to be included into a Z-Wave network by a remote control or any other Z-Wave controller. If an action is detected, the sensor sends a signal to the Z-Wave network main controller.


  • Opening detector
  • Button to include / exclude the detector
  • Low battery detection
  • Tamper protection
  • 1 potential free wired input
  • 1 analog input 1-Wire (for connecting a temperature sensor DS18B20)
  • Very small, small size
  • Ease of use and installation


  • Module Type: Z-Wave Transmitter
  • Colours: White, Grey, Black, Gray Claire, Claire Brown, Brown, Dark Brown
  • Power: Battery ER14250 (1/2AA) 3.6 V
  • Frequency: 868.42 Mhz
  • Transmission distance: 50m free field, 30 m indoors
  • Dimensions: 76 x 17 x 19 mm
  • Operating temperature: 0-40 ° C


Product Manual


Primary Controller Compatibility
1 eeDomus+ Full Compatible
Fibaro Home Center 2 v4.130 Full Compatible
3 Fibaro Home Center Lite v v.4.080 Full Compatible
4 Vera Edge / Plus Full Compatible
5 Zipabox/Zipamini/ZipaTile Full Compatible
6 Piper / Piper NV (v.1.7.1) Full Compatible
Indigo Compatible (Testing)
8 jeedom full compatible
10 Domoticz Full Compatible
ZiHome Full Compatible
49 Vera 3 Full Compatible
49 Vera Lite Full Compatible
Tech Data
51 Power Supply Batery ER14250 3.6V
54 SDK 4.55
55 App Version 2.5
56 Device Type Routing Binary Sensor
58 Z-Wave Alliance Product Link
90 Incluison 1) Open the cover. 2) Remove the battery blocker. 3) Close the cover. 4) Locate the sensor nearby the main Z-Wave controller. 5) Set the main Z-Wave controller into learning mode (see main controller’s operating manual). 6) Quickly, triple click the TMP button located on the bottom of the casing. 7) Wait for the device to be added to the system. Successful adding will be confirmed by the controller. 9) Install the device using the attached self-adhesive pads.
91 Exclusion 1) Place the device within direct range of the Z-Wave controller. 2) Make sure that Sensor's cover is closed. 3) Set the main Z-Wave controller into learning mode (see main controller’s operating manual). 4) Quickly, triple click the TMP button. 5) Wait for the device to be excluded from the system. Successful exclusion will be confirmed by the controller.
92 Factory Reset
93 Wake Up FIBARO Door/Window Sensor will wake up at a defined time interval and will ALWAYS try to communicate with the main controller. Setting wake up interval to 0 disables sending Wake Up Notification frame automatically. There is a possibility to wake up the device manually by a single TMP button click.

Opinii (7)

Spune-ţi opinia

Notă: Codul HTML este citit ca şi text!

Rău            Bun


Z-Wave Romania

The On-line shop for home automation Z-Wave products. Based in Spain, we deliver all over the world. Z-Wave is the international standard for wireless networking of home control systems. You can manage lighting, electricity, blinds, alarms etc ... Z-Wave products from different vendors work well together allowing control of smart home.

Contact Us