Mini Price On / Off Z-Wave Plus Everspring


Out Of Stock
Cod produs:


Mini jack On / Off is designed to control the switching on and off lighting and electrical equipment in your home. With a voltage of 220 - 240 V, this socket can withstand loads up to 1500W (resistance), 800W (incandescent), 200W (motor, fluorescent, LED).

Mini jack On / Off is a device compatible Z-Wave ™ is designed to work with all compatible networks Z-Wave ™. It can be controlled by a remote control, PC software or any Z-Wave controller in your network.



  •     Order a lamp or a remote device
  •     Module integrating taken directly from an electrical outlet and the load to be controlled
  •     ON / OFF function to control lights or appliances (no change)
  •     Control of local support via integrated button
  •     Z-Wave technology More
  •     Reduced dimensions to pass almost unnoticed
  •     Status LEDs on the integrated button
  •     Z-Wave repeater function


  •     Module Type: receiver Z-Wave
  •     Power: 230 V, 50 Hz
  •     Consumption: 0.6W
  •     Maximum power:
    •    Resistive Load: 1500W
    •    Incandesence bulb: 800W
    •    CFL Bulb: 200W
    •    LED bulb (not dimmable): 200W
  •     Frequency: 868.42 Mhz
  •     Range: up to 70 m outdoors, up to 30 m in buildings
  •     Display: LED on the button
  •     dimensions:
    •    Length (including connector): 74mm
    •    Diameter: 52mm


Primary Controller Compatibility
1 eeDomus+ Full Compatible
Fibaro Home Center 2 v4.130 Full Compatible
3 Fibaro Home Center Lite v v.4.080 Full Compatible
4 Vera Edge / Plus Full Compatible
5 Zipabox/Zipamini/ZipaTile Full Compatible
6 Piper / Piper NV (v.1.7.1) Full Compatible
Indigo Full Compatible
8 jeedom Full Compatible / Z-Way / PoPP Hub Full Compatible
10 Domoticz Full Compatible
11 OpenHAB Full Compatible
ZiHome Full Compatible
Tech Data
50 IP Rating IP20
51 Power Supply 230 V, 50 Hz
52 Attachable Loads Resistive Load: 1500W Incandescent: 800W Fluocompact: 200W LED (non Dimmable): 200W
53 Explorer Frames - NWI Support Yes
54 SDK 6.51.02
55 App Version
56 Device Type On/Off Power Switch
57 Peper1 Database link
58 Z-Wave Alliance Product Link
90 Incluison 1. Put the Z-Wave Controller into inclusion mode. 2. Press the link key three times within 1.5 seconds to put the unit into inclusion mode.
91 Exclusion 1. Put the Z-Wave Controller into exclusion mode. 2. Press the link key three times within 1.5 seconds to put the unit into exclusion mode.
92 Factory Reset 1. Press the link key three times within 1.5 seconds to put the unit into exclusion mode. 2. Within 1 second of step 1, press link key again and hold it until LED is off (about 5 seconds). 3. Node ID is excluded. The device reverts to factory default state and will be in auto-inclusion mode for 4 minutes. 4. Use this procedure only in the event that the network primary controller is missing or otherwise inoperable.

Opinii (1)

Spune-ţi opinia

Notă: Codul HTML este citit ca şi text!

Rău            Bun


Z-Wave Romania

The On-line shop for home automation Z-Wave products. Based in Spain, we deliver all over the world. Z-Wave is the international standard for wireless networking of home control systems. You can manage lighting, electricity, blinds, alarms etc ... Z-Wave products from different vendors work well together allowing control of smart home.

Contact Us