Rail Din Adapter For Fibaro FGS-222 - Eutonomy

21,45

Disponibilitate:
În Stoc
Cod produs:
ES-21-EUT-S222
Producător:
Eutonomy

Not yet rated
Spune-ţi opinia

Opţiuni disponibile

Descriere

The S222 adapter is used to install the Fibaro® Switch FGS-222 module on a DIN type rail in the electrical panel.

The S222 adapter consists of a housing and an electronic board, on which the Switch FGS-222 module is mounted. The housing dimensions are suitable for a standard DIN rail.

The electronic board contains a set of screw terminals, where all wires (power, input and output signals, control buttons) can be connected securely.

Functions:

  • DIN adapter for Fibaro Switch FGS-222 with/without pushbutton
  • Used to install the Fibaro Switch FGS-222 module on DIN rail type in the electrical panel
  • Free location on the label to locate the line checked

Technical Characteristics: 

  • Supply voltage: 230 V AC +/- 10%, 50-60Hz
  • Load power: max 6.5A per channel, 10A total
  • Dimensions: 34.8 x 87.3 x 64.7 mm
  • Width in TE units: 2 TE modules
  • Wire conductor section: max. 2.5 mm2
  • Maximum length of wires connected to inputs Sx, S1, S2: 20m
  • Operating temperature: 0 ° C to +50 ° C
  • Relative humidity: ≤90%, no condensation

Regulation:

  • LVD 2014/35 / CE
  • RoHS 2011/65 / EU

Manual:

Specificaţii

Tech Data
50 IP Rating IP21
52 Attachable Loads Max 6.5A per channel, 10A total

Opinii (0)

Spune-ţi opinia

Notă: Codul HTML este citit ca şi text!

Rău            Bun


Continuare

Z-Wave Romania

The On-line shop for home automation Z-Wave products. Based in Spain, we deliver all over the world. Z-Wave is the international standard for wireless networking of home control systems. You can manage lighting, electricity, blinds, alarms etc ... Z-Wave products from different vendors work well together allowing control of smart home.

Contact Us

+34600612889
+34600612889
danyvizariu@gmail.com
danyvizariu@gmail.com
danyvizariu
danyvizariu

Facebook